H1: Practical Load Test of F60TW Floor Scrubber – In-Plant Multi-Zone Industrial & Commercial Simulation

H2: Project Background

H2: Baseline Cleaning Reference (Traditional Manual Tools)

• Labor allocation: Minimum 3 staff required to finish full-area cleaning with mops and dry vacuum units
• Compliance risk: Separated washing and drying steps leave surface moisture, which fails to satisfy Germany ASR A1.5 anti-slip workplace regulations
• Operation limitation: Long single cleaning cycle cannot support segmented shift cleaning for high-traffic venues

H2: F60TW Floor Scrubber Standard Configuration Used in Simulation

1. Core cleaning efficiency: Rated productivity 3650 m²/h; 660mm brush working width, 830mm LINATEX rubber squeegee width
2. Liquid storage system: 60L clean water tank, 65L recovery dirty water tank, built-in 3L automatic soap tank for oil and organic stain removal
3. Power assembly: Dual 350W brush motors + single 400W suction motor; matched two 12V 103Ah batteries, ECO mode continuous runtime up to 4 hours
4. Brush assembly: 13-inch magnetic quick-release brush base, adjustable brush contact pressure 23–25kg, compatible with matched 13-inch scouring pad holders
5. Auxiliary structure: Built-in traction assist system to lower pushing resistance during long-duration operation
   
   
   Standard supporting parts deployed: LINATEX rubber squeegee blade, 24V 15A matching charger, full set of 13-inch red brushes and scouring pads.

H2: On-Site Continuous Operation Test Data & Functional Performance

1. Single operator independently completes full-area cyclic cleaning. The 830mm LINATEX squeegee achieves one-pass washing, scrubbing and full water recovery, with no standing residual moisture on all floor materials after operation.
2. Solenoid automatic water stop activates when brush rotation pauses, cutting water supply to reduce liquid consumption, matching German industrial water-saving norms.
3. All safety monitoring modules operate stably: low clean water reminder, dirty water overflow red LED indicator, automatic power-off fault protection to avoid motor and circuit overload damage under long load.
4. Magnetic brush quick-disassembly design allows pad and brush replacement within 30 seconds when switching between oil-stained concrete and clean tile zones, shortening equipment standby time.
5. Full-load machine weight reaches 178kg, overall dimension 1320 × 830 × 1100 mm; the compact body passes all 1.2m narrow aisle passages without collision.

H2: Test Conclusion for German Distributors & End Clients